+/-12V to +/-5V Power Supply Regulator By LM317 and LM337 | Schematic Diagrams

Schematic Diagrams

Useful schematic and wiring diagrams. ✔ ✔ Enjoy electronic circuits, let your idea comes to hardware

+/-12V to +/-5V Power Supply Regulator By LM317 and LM337


+/ 12V to +/ 5V Power Supply Regulator By LM317 and LM337

This is the voltage converter to get the voltage of ±5V from the input voltage of ±12V. Using the 3 terminal voltage regulator for the voltage to be changed in this unit. As the regulator, LM317 is used for the positive voltage and LM337 is used for the negative voltage. The output current can make output in 1 A.
The point of this unit making is the radiator (the heatsink) of the regulator. The regulator becomes hot when outputting the 1 A electric current and when there is not a heatsink, the regulator breaks.
The merit of the regulator of this type is what little noise occurs and is cheap and there are few use parts. The demerit is the thing with the conversion efficiency which isn’t good. When outputting from 12 V to 5 V, the efficiency (the output power/input power) is 42%. Recently, the switching regulator became cheap. The number of parts increases little but in case of more than 1 A power supply, you had better use the switching regulator with the good efficiency.

Source : http://www.interq.or.jp/japan/se-inoue/e_ckt21.htm (Good site)

, ,

Comments are currently closed.

Sponsored Link



Schematic Search

AudioBatteryBlower motorBuickChevroletCigar LightercircuitCircuit Diagramcircuit diagramselectrical circuitElectrical SchematicElectrical SystemElectronic CFordFuel PumpFuel Pump Relayfuse blockfuse boxFuse Holderfuse layoutfuse mapfuse panelHeadlampHornHorn RelayIgnition coilIgnition switchInstrument ClusterlightingMeterPowerpower supplyPower WindowRadioRelayschematic circuitschematic diagramsStarter RelayStudebakerTurn SignalWiperWiring Diagrawiring diagramsWiring Harneswiring schematic

Schematic Diagrams

Powered by WordPress. Designed by SuperSidor. Schematic Diagram

Recent Posts