12V to 16V DC/DC Converter with LM2577 | Schematic Diagrams


Schematic Diagrams

Useful schematic and wiring diagrams. ✔ ✔ Enjoy electronic circuits, let your idea comes to hardware

12V to 16V DC/DC Converter with LM2577

]]>

The circuit is a boost step-up regulator based around an LM2577-ADJ voltage regulator chip and a few other discrete components. Resistors R1 and R2 set the regulated output voltage.
A switch inside the voltage regulator closes between pins 4 and 3, causing current to flow through the inductor to ground. When the switch is released a few microseconds later, a back-EMF ‘kick’ is produced by the inductor, resulting in a positive pulse with respect to the input voltage. This pulse charges the output capacitor via the schottky diode, which tends towards an equilibrium voltage.

12v-to-16v-dcdc-converter-with-lm2577

The switch continues to oscillate, the diode preventing the switch from shorting the output capacitor during the ‘on’ phase. The output voltage is monitored via the voltage divider R1/R2, causing the duty cycle of the switch oscillator to be continuously regulated in order to maintain a constant output voltage under varying loads.
The output voltage defined by R1/R2, if you want to take a 12 volt to 15 volt dc booster is easily.

Source: http://www.mcrent.com/workbench/dcdc1216/

Most Wanted Diagrams:

]]>

,

Comments are currently closed.

Sponsored Link

    ]]>

Categories

Schematic Search

BatteryBlower motorBuickCadillacChevroletCigar LighterCircuit DiagramDodgeelectrical circuitElectrical SchematicElectrical SystemFordFuel PumpFuel Pump Relayfusefuse blockfuse boxFuse Holderfuse layoutfuse mapfuse panelGMCHeadlampHeaterHondaHornHorn RelayIgnition coilIgnition switchInstrument ClusterInstrument panelOldsmobilePontiacPower WindowRadioRelayschematic diagramStarter RelayStop LampStudebakerTurn SignalWiperWiring Diagrawiring diagramWiring Harnes

Schematic Diagrams

Powered by WordPress. Designed by SuperSidor. Schematic Diagram

Recent Posts