1.5A Dual Input Switchmode Charger | Schematic Diagrams

Schematic Diagrams

Useful schematic and wiring diagrams. ✔ ✔ Enjoy electronic circuits, let your idea comes to hardware

1.5A Dual Input Switchmode Charger


1.5A Dual Input Switchmode Charger

15A Dual Input Switchmode Charger

The bq24140 is a compact, flexible, high-efficiency, USB-friendly switch-mode charge management device for single-cell Li-ion and Li-polymer batteries used in a wide range of portable applications. The charge parameters can be programmed through an I2C interface. The IC integrates two synchronous PWM chargers, power MOSFETs, input current sensing, high-accuracy current and voltage regulation, and charge termination, into a small WCSP package.

The IC charges the battery in three phases: conditioning, constant current and constant voltage. The input current is automatically limited to the value set by the host. Charge is terminated based on user-selectable minimum current level. A safety timer with reset control provides a safety backup for I2C interface.

Device Uses
  • Mobile Phones and Smart Phones
  • MP3 Players
  • Handheld Devices
  • High-Efficiency Mini-USB/AC Battery Charger for
  • Single-Cell Li-Ion and Li-Polymer Battery Packs
  • Charge Battery and Provide USB-OTG Support at the Same Time
  • High-Accuracy Voltage and Current Regulation
  • Input Current Regulation Accuracy: ±5% (100mA, 500mA)
  • Charge Voltage Regulation Accuracy: ±0.5% (25°C), ±1% (0-125°C)
  • Charge Current Regulation Accuracy: ±5%
  • Boost Mode Operation for USB OTG:
  • Input Voltage Range (from Battery): 2.3V to 4.5V
  • Output for VBUS: 5.05V/500 mA
  • Input Voltage Based Dynamic Power Management Provides
  • Protection Against Current Limited Adapters
  • Bad Adaptor Detection and Rejection
  • Safety Limit Register for Added Security by Limiting
  • Maximum Charge Voltage and Maximum Charge Current
  • 20-V Absolute Maximum Input Voltage Rating
  • 9.0-V Maximum Operating Input Voltage
  • Charge Faster than Linear Chargers
  • Built-in Input Current Sensing and Limiting
  • Integrated Power FETs for up to 1.5-A Charge Rate
  • Programmable Charge Parameters Through I2C Interface
  • (up to 3.4 Mbps):
  • Input Current
  • Fast-Charge/Termination Current

, ,

Comments are currently closed.

Sponsored Link



Schematic Search

AudioBatteryBlower motorBuickChevroletCigar LightercircuitCircuit Diagramcircuit diagramselectrical circuitElectrical SchematicElectrical SystemElectronic CFordFuel PumpFuel Pump Relayfuse blockfuse boxFuse Holderfuse layoutfuse mapfuse panelHeadlampHornHorn RelayIgnition coilIgnition switchInstrument ClusterlightingMeterPowerpower supplyPower WindowRadioRelayschematic circuitschematic diagramsStarter RelayStudebakerTurn SignalWiperWiring Diagrawiring diagramsWiring Harneswiring schematic

Schematic Diagrams

Powered by WordPress. Designed by SuperSidor. Schematic Diagram

Recent Posts