Tag Archives: switcher

Low-Voltage Remote Mains Switch

Schematic Diagrams      Comments Off on Low-Voltage Remote Mains Switch

This circuit allows a 240V mains appliance to be controlled remotely via low-voltage cabling and a pushbutton switch. The mains appliance (in this case, a light bulb) is switched with a suitably-rated relay. All of the electronics is housed in an ABS box located in proximity to the appliance. The… Read more »

Master/Slave Switch

Schematic Diagrams      Comments Off on Master/Slave Switch

In this age of enlightenment any sort of relationship that could be described as master/slave would be questionable but for the purposes of this circuit it gives a good idea of how it functions. The circuit senses mains current supplied to a ‘master’ device and switches ‘slave’ equipment on or… Read more »

Mains Slave Switcher II

Schematic Diagrams      Comments Off on Mains Slave Switcher II

As a guide, a one-inch reed switch with 40 turns reliably switched on with the current flowing through a 150-watt lamp (approx. 625 mA) but larger reeds may require more turns. If the master appliance draws less current (which is unlikely with power tools) more turns will be required. The… Read more »

1A SIMPLE SWITCHER in SOT-23

Schematic Diagrams      Comments Off on 1A SIMPLE SWITCHER in SOT-23

1A SIMPLE SWITCHER in SOT-23 The LMR12010 regulator is a monolithic, high frequency, PWM step-down DC/DC converter in a 6-pin Thin SOT23 package. It provides all the active functions to provide local DC/DC conversion with fast transient response and accurate regulation in the smallest possible PCB area. With a minimum… Read more »