2009 Harley Davidson Road King Main Fuse Box Diagram 2009 Harley Davidson Road King Main Fuse Box Map Fuse Panel Layout Diagram Parts: instrument, brake, cruise, radio memory, brake light relay, headlamp, ignition, lighting, radio power, accessory, battery.
2008 Harley Road King Engine Fuse Box Diagram 2008 Harley Road King Engine Fuse Box Map Fuse Panel Layout Diagram Parts: accessory, instrument, brake, radio power, radio memory, battery, brake light relay, headlamp, ignition coil, lighting.
RF Lighting System Platform Zilog, the legendary MCU company and a wholly-owned subsidiary of IXYS Corporation (NASDAQ:IXYS), introduced their “ZAURA” technology. ZAURA is a wireless MCU-based platform for wireless connectivity and control for lighting systems in offices, schools, factories and other facilities. Lighting is a major energy consumer worldwide, and… Read more »
LED Lighting Dimmers TRIAC-dimmers were originally designed to dim incandescent filament lamps. The elimination of these lamp types increases the need for alternative dimming methods. The use of TRIAC-dimmers in LED-systems causes unwanted flicker, visible to the eye, due to phase modulation. This prevents linear dimming of LEDs down to… Read more »
PMU & Lighting Control The TPS658310 Power Management Unit is a broad use, multi-channel device, for portable applications. The device consists of an Integrated Power Path Management and Switch Mode Li-Ion Battery Charger that provides system power from a regulated wall adapter or a USB port. It also handles lighting… Read more »
Non-Dimmable LED Lighting Controller Texas Instruments Incorporated introduced a new off-line primary side sensing controller to its portfolio of non-dimming LED drivers. The new TPS92310 AC/DC constant current driver with power factor correction (PFC) reduces cost and shrinks-to-fit in high-power LED retrofit bulbs, including A19, PAR30/38 and GU10. For more… Read more »
This be circuit warn when be become dark, or Light sensitive switch. By use electronics part the base is important , be the transistor 2N2926 and AC128. For the light sensor also LDR (light dependent resistor) or a resister quickly the light. When have no the light makes Q1 ,… Read more »
It uses a normal 120 to 6V stepdown transformer in reverse to step 12V to about 350V to drive a lamp without the need to warm the filaments. Q1 must be installed on a heat sink. A 240V to 10V transformer will work better then the one in the parts… Read more »
This inverter is very easy to construct, reliable, and even powerful enough to light up a 15W florescent tube (if you cool your transistor well). The only hard-to-find piece of this baby is the so-called yellow inverter transformer. It’s a miniature high frequency transformer that has a 25mm x 20mm… Read more »
This is an electronic choke for a Conventional Fluorescent Lamp. This was an application note of MJE13005 a High Voltage Switching NPN Power Transistor. I Might have modified it. This was very popular in the early days, The Coil Winding and Ferrite is very Critical design. The diodes, npn transistor… Read more »